Coilhose Pneumatics PE0417-100 Polyethylene Tubing 1/4" OD x .170" ID, 100 Ft, Natural

This is a 100 foot coil of Coilhose Pneumatics polyethylene tubing, part number PE0417-100, sized 1/4 inch OD by 0.170 inch ID with a 0.040 inch wall. In the Coilhose numbering, PE identifies polyethylene, 04 the 1/4 inch outside diameter, 17 the 0.170 inch inside diameter, and 100 the coil length in feet; a letter suffix such as N, B or Y gives the color.

Coilhose rates this tubing at 200 psi working pressure over a -40 to 150 deg F range. The 50 Shore D polyethylene is lightweight and semi-rigid, and it is listed as FDA and NSF 51 compliant, which allows use on food equipment and water lines as well as compressed air. It is intended for push-to-connect fittings such as the Coilhose Coilock line and for compression style poly-tube fittings.

Maintenance technicians, machine builders, packaging and food processing plants, and instrumentation installers use 1/4 inch PE tubing for pneumatic control lines, air supply runs to cylinders and valves, drip and water lines, and low pressure fluid transfer.

Available from King Surplus inventory in Del Rio, Texas.

• Product: Polyethylene (PE) pneumatic tubing
• Outside Diameter: 1/4 in
• Inside Diameter: 0.170 in
• Wall Thickness: 0.040 in
• Length: 100 ft
• Color: Natural (per record title; label shows PE0417-100 without color suffix)
• Working Pressure: 200 psi
• Temperature Range: -40 to 150 deg F
• Hardness: 50 Shore D
• Compliance: FDA, NSF 51
• Fitting Compatibility: Coilhose Coilock push-to-connect and Poly-Tube fittings
• Spec Basis: Package label photo (COILHOSE PNEUMATICS, PE0417-100, POLYETHYLENE TUBING, 1/4" OD X .170" ID); Coilhose Pneumatics PE0417-100N specification page (https://coilhose.com/index.php/plastic-tubing/polyethylene-pe-tubing/pe0417-100n.html); Next Industries listing for PE0417-100Y (https://www.nextind.com/itemdetail/11642-PE0417-100Y)