Dodge 2517 Taper-Lock Bushing, 1-3/16 in Bore
2517 1-3/16 Bushing Specifications: Bore, Series & Keyway
Sheave & Shaft Compatibility for the 2517 1-3/16
| Description | Details |
|---|---|
| Available Quantity | 1 |
| Model | 2517 1-3/16 |
| Condition | New |
| Manufacturer | Dodge |
| Asset Number | KSC1290 / 347 |
| Guarantee or ASIS | 1. HIGH CONFIDENCE ITEM: We will offer a 100% 14 Day money back less S&H. |
| Inspections - Yellow Tag | 1. New in Box |
| Packaging Cost | 1.6 6x10 CH $3.00 |
$19.90
Basic Information
Asset #
KSC1290 / 347
Available Quantity
1
Inspections - Yellow Tag
1. New in Box
Condition
New
Guarantee or ASIS
1. HIGH CONFIDENCE ITEM: We will offer a 100% 14 Day money back less S&H.
Item Description
Dodge 2517 Taper-Lock bushing with a 1-3/16 inch finished bore, marked TAPER-LOCK and MADE IN USA. Dodge, now part of RBC Bearings, is one of the standard American power transmission names.
A Taper-Lock bushing is the tapered, flangeless interface that locks a bushed sheave or sprocket onto its shaft: the bushing draws into the mating hub as the cap screws are tightened, grips the shaft through the keyway, and pulls free cleanly for service. The 2517 is one of the most common sizes in the range.
These mount fan, pump, blower, and conveyor drive sheaves on 1-3/16 inch shafts. Buyers match bushing series and bore exactly, since the series must suit the hub the sheave was bored for.
Appears unused, no original box; light surface scratches and staining, no rust.
New surplus, available from King Surplus inventory in Del Rio, Texas.
Factory Information
- Bushing series: 2517 Taper-Lock
- Type: Tapered, flangeless bushing; draws into a mating Taper-Lock hub as the cap screws are tightened
- Bore: 1-3/16 in, keyed
- Country of manufacture: USA (the part is stamped MADE IN USA)
- Part markings, verbatim: 2517 | TAPER-LOCK | MADE IN USA | 1-3/16
- Manufacturer: NOT ESTABLISHED FROM THE PART. No maker's name is stamped anywhere on this bushing in any of the 10 record photographs. The record carries Dodge (FID 56); Taper-Lock is a Dodge trade name and the series and bore stampings match Dodge's range, but the attribution rests on the record and not on the item. Taper-Lock is also an industry-standard interface and interchangeable bushings are made by several manufacturers.
- Spec Basis: verified 2026-09-16 against the bushing's own stampings as transcribed from all 10 record photographs, which give the 2517 series, the 1-3/16 bore, the TAPER-LOCK name and the country of manufacture, and give no maker's name. Record model (FID 57 2517 1-3/16) agrees with the part. The previous entry already carried the correct caution about the missing manufacturer marking and nothing in it was found to be wrong; the markings are now recorded verbatim. No dimensional, torque or screw-size figures are stated here because none are on the part and none were taken from a published Dodge source in this check.
Specifications
Dodge
2517 1-3/16
N/A
N/A
N/A
N/A
4
4
3
N/A
0
4
KSC1290 / 347
Packaging fees
1.6 6x10 CH $3.00
SELL TO KING SURPLUS
Sitting on surplus of your own?
We'll buy it.
Family owned, four generations, since 1970.
AssetRecovery™
Spot buy for one-off surplus. We receive it, appraise it, and send you a buyout offer.
Sell Your Surplus →AssetMan™
Full asset management for large companies with fluid streams of assets. Redeploy, sell, dismantle, recycle, store, all tracked in your own portal.
Partner With Us →Payment Details
$19.90
Payment MethodsPayment Types Accepted : Visa, Mastercard, ACH, Wire Transfer, Check (14 Day Hold Before Release), Cash