Flexline 1/2" x 11" Stainless Steel Braided Hose Assembly, 90 deg Elbow, JIC-08 Female Swivel
1/2" X 11" Specifications: Pressure Rating, Size & Ends
Hydraulic System Fitment for Flexline 1/2" X 11"
| Description | Details |
|---|---|
| Available Quantity | 5 |
| Model | 1/2" X 11" |
| Condition | New |
| Manufacturer | Flexline |
| Asset Number | KSC1290 / 1966 |
| Guarantee or ASIS | 2. WE GUARANTY OUR WORKMANSHIP & OUR WORD ONLY: 14 Day return |
| Inspections - Yellow Tag | 1.1 Appears Unused no box |
| Packaging Cost | 1.6 6x10 CH $3.00 |
$14.95
Basic Information
Asset #
KSC1290 / 1966
Available Quantity
5
Inspections - Yellow Tag
1.1 Appears Unused no box
Condition
New
Guarantee or ASIS
2. WE GUARANTY OUR WORKMANSHIP & OUR WORD ONLY: 14 Day return
Item Description
This is a braided flexible hose assembly with a 90 degree angled end, recorded as 1/2 inch by 11 inches. The fitting is stamped JIC-08, a dash 8 size that corresponds to a 1/2 inch 37 degree JIC flare connection, and carries a 304 material mark together with ANSI B16.9 and an ASTM/ASME specification mark. A partial brand stamp reads FLEX, and the record lists the maker as Flexline.
Flexline is a specialty hose assembly manufacturer in the Northeast United States, established in 1950. The company builds stainless steel metal, PTFE, silicone, composite and rubber hose assemblies, makes flexible metal hose from 3/16 inch to 24 inch ID and states that it tests every assembly it builds.
Short braided hose assemblies with an elbow end are used to connect pumps, compressors, instruments and hydraulic or process lines where the connection must absorb vibration, misalignment or thermal movement, or where a rigid pipe run would not fit. Maintenance mechanics, plant engineers and equipment builders order them by end fitting size, overall length and material.
Available from King Surplus inventory in Del Rio, Texas.
Factory Information
- Brand Marking (fitting stamp, partial): FLEXL... (record: Flexline)
- Type: Braided flexible hose assembly with 90 degree angled end
- End Connection Marking (stamp): JIC-08 (dash 8, 1/2 in 37 degree JIC flare size)
- Material Marking (stamp): 304
- Standards Marked on Fitting (stamp): ANSI B16.9; ASTM/ASME specification (partly illegible)
- Record Size Description: 1/2 in x 11 in
- Spec Basis: fitting stamps read from photos (partly obscured); Flexline company metal hose page (https://flexline.com/metal-hose/); no part number or datasheet identified for this assembly
Specifications
Flexline
1/2" X 11"
N/A
N/A
N/A
N/A
3
6
1
N/A
0.2
0.77
KSC1290 / 1966
Packaging fees
1.6 6x10 CH $3.00
SELL TO KING SURPLUS
Sitting on surplus of your own?
We'll buy it.
Family owned, four generations, since 1970.
Client Asset Management
A managed joint venture for enterprise surplus, powered by our AMP™ (Asset Management & Procurement).
Partner With Us →Payment Details
$14.95
Payment MethodsPayment Types Accepted : Visa, Mastercard, ACH, Wire Transfer, Check (14 Day Hold Before Release), Cash