GNP Graystar 61825TPR Abrasive Blast Nozzle
61825TPR Nozzle Specifications: Orifice, Thread & Material
Spray & Process Applications for GNP Graystar 61825TPR
| Description | Details |
|---|---|
| Available Quantity | 3 |
| Model | 61825TPR |
| Condition | New |
| Manufacturer | GNP Graystar |
| Asset Number | KSC1290 / 2178 |
| Guarantee or ASIS | 1. HIGH CONFIDENCE ITEM: We will offer a 100% 14 Day money back less S&H. |
| Inspections - Yellow Tag | 1. New in Box |
| Packaging Cost | 1.6 6x10 CH $3.00 |
$59.95
Basic Information
Asset #
KSC1290 / 2178
Available Quantity
3
Inspections - Yellow Tag
1. New in Box
Condition
New
Guarantee or ASIS
1. HIGH CONFIDENCE ITEM: We will offer a 100% 14 Day money back less S&H.
Item Description
This is an abrasive blast nozzle marked GRAYSTAR with part number 61825TPR. GNPGraystar Specialty Materials supplies ceramic and abrasive products, including blasting nozzles and nozzle inserts made from boron carbide or tungsten carbide.
A blast nozzle is the wear part at the end of a sandblasting hose. Compressed air carries abrasive through the nozzle bore, and the bore shape and size set the air consumption, abrasive flow and blast pattern. Because the abrasive stream wears the bore, nozzles are made from hard carbide materials and are replaced as the bore opens up and performance drops.
GNPGraystar publishes a service life guide for its nozzle materials. Tungsten carbide is listed at 500 to 800 hours with steel grit and shot and 20 to 40 hours with aluminum oxide, while boron carbide is listed at 1500 to 2500 hours with steel grit and shot and 200 to 1000 hours with aluminum oxide. The company does not publish a data sheet for part 61825TPR, so its bore, length, thread and liner material are not stated here. Blasting contractors, industrial coatings crews and fabrication shops buy nozzles like this as replacement parts for blast pots and blast cabinets.
Available from King Surplus inventory in Del Rio, Texas.
Factory Information
- Brand Marking (photo): GRAYSTAR
- Part Number Marking (photo): 61825TPR
- Type: Abrasive blast nozzle
- Manufacturer Nozzle Materials Offered: Boron carbide and tungsten carbide (material of this part number not published)
- Manufacturer Service Life Guide, Tungsten Carbide: 500 to 800 hrs with steel grit and shot; 20 to 40 hrs with aluminum oxide
- Manufacturer Service Life Guide, Boron Carbide: 1500 to 2500 hrs with steel grit and shot; 200 to 1000 hrs with aluminum oxide
- Spec Basis: marking read from photos; GNPGraystar nozzles category page (https://gnpgraystar.com/product-category/abrasive-products/nozzles/); no datasheet for 61825TPR found
Specifications
GNP Graystar
61825TPR
N/A
N/A
N/A
N/A
2
4
2
N/A
2
2.38
KSC1290 / 2178
Packaging fees
1.6 6x10 CH $3.00
SELL TO KING SURPLUS
Sitting on surplus of your own?
We'll buy it.
Family owned, four generations, since 1970.
Client Asset Management
A managed joint venture for enterprise surplus, powered by our AMP™ (Asset Management & Procurement).
Partner With Us →Payment Details
$59.95
Payment MethodsPayment Types Accepted : Visa, Mastercard, ACH, Wire Transfer, Check (14 Day Hold Before Release), Cash