Morehouse Cowles B10A0U Cowless HI-Shear Impeller, Industrial Mixing Blade 10" Diameter
Morehouse Cowles B10A0U Blade Specifications: Size & Type
Condition & What's Included
| Description | Details |
|---|---|
| Available Quantity | 4 |
| Model | B10A0U |
| Condition | New |
| Manufacturer | Morehouse Cowles |
| Asset Number | KSC1290 / 1948 |
| Guarantee or ASIS | 1. HIGH CONFIDENCE ITEM: We will offer a 100% 14 Day money back less S&H. |
| Inspections - Yellow Tag | 1.1 Appears Unused no box |
| Packaging Cost | 1.6 6x10 CH $3.00 |
$99.00
Basic Information
Asset #
KSC1290 / 1948
Available Quantity
4
Inspections - Yellow Tag
1.1 Appears Unused no box
Condition
New
Guarantee or ASIS
1. HIGH CONFIDENCE ITEM: We will offer a 100% 14 Day money back less S&H.
Item Description
Factory Information
- Manufacturer: MorehouseCowles - see basis note below
- Model: B10A0U
- Marking cast into the blade: COWLES HI-SHEAR IMPELLER, ROTATION, THIS SIDE UP
- Type: Cowles Hi-Shear impeller (sawtooth dispersion blade) for high-speed dissolvers and dispersers
- Purpose (manufacturer published): "used for ultimate dispersion, mixing, dissolving, emulsifying and de-agglomerating", for "dispersing low or high viscosity materials or mixing dry to liquid or liquid to liquid products"
- Material (manufacturer published): "The original COWLES design is constructed of 304 stainless steel, but also available in 316 stainless steel and Tungsten carbide coated." The grade of this particular blade is not marked on it and has not been established.
- Blade Diameter: nominally 10 in - see basis note; MorehouseCowles catalogues Hi-Shear impellers from 2 in to 40 in, and 10 in is a catalogued size.
Spec Basis: verified 2026-09-16 against this record's own photographs, which show a sawtooth dispersion blade with COWLES HI-SHEAR IMPELLER, ROTATION and THIS SIDE UP cast into it, and the model B10A0U. No manufacturer name appears on the blade, so the MorehouseCowles attribution rests on "Cowles Hi-Shear Impeller" being their own product name; this agrees with record manufacturer (FID 56) and model (FID 57 B10A0U). The purpose, material and size-range lines above are quoted from the MorehouseCowles data sheet "Genuine MorehouseCowles impeller blades" (09/2022, doc 41645-VK-RB), whose text was extracted directly rather than summarised.
CORRECTIONS: the 10 in diameter is NOT manufacturer-published for part number B10A0U - B10A0U does not appear in the MorehouseCowles data sheet, which carries no part-number table at all. The figure rests on the 10 in the part number and on independent surplus listings describing B10A0U as a 10 in blade, and the blade has not been measured here; it is recorded as nominal for that reason. A "Mounting: hub bore fits MorehouseCowles disperser shaft; compatible with MorehouseCowles V-series and related platforms" line was taken out entirely - no such compatibility is published for this part and the bore has not been measured. The application line was rewritten to the manufacturer's own published wording; the previous list of paints, coatings, inks and adhesives was not from any MorehouseCowles document.
Specifications
Morehouse Cowles
B10A0U
N/A
N/A
N/A
N/A
10
10
1
N/A
2
4.2125
KSC1290 / 1948
Packaging fees
1.6 6x10 CH $3.00
SELL TO KING SURPLUS
Sitting on surplus of your own?
We'll buy it.
Family owned, four generations, since 1970.
AssetRecovery™
Spot buy for one-off surplus. We receive it, appraise it, and send you a buyout offer.
Sell Your Surplus →AssetMan™
Full asset management for large companies with fluid streams of assets. Redeploy, sell, dismantle, recycle, store, all tracked in your own portal.
Partner With Us →Payment Details
$99.00
Payment MethodsPayment Types Accepted : Visa, Mastercard, ACH, Wire Transfer, Check (14 Day Hold Before Release), Cash