KMT 72131853 Waterjet UHP Bent Tube, .38 x .125 in, Attenuator
KMT 72131853 Waterjet Parts Specifications: Size & Type
Condition & What's Included
| Description | Details |
|---|---|
| Available Quantity | 2 |
| Model | 72131853 |
| Condition | New |
| Manufacturer | KMT |
| Asset Number | KSC1290 / 2116 |
| Guarantee or ASIS | 2. WE GUARANTY OUR WORKMANSHIP & OUR WORD ONLY: 14 Day return |
| Inspections - Yellow Tag | 1.1 Appears Unused no box |
| Packaging Cost | 1.6 6x10 CH $3.00 |
$49.95
Basic Information
Asset #
KSC1290 / 2116
Available Quantity
2
Inspections - Yellow Tag
1.1 Appears Unused no box
Condition
New
Guarantee or ASIS
2. WE GUARANTY OUR WORKMANSHIP & OUR WORD ONLY: 14 Day return
Item Description
KMT part number 72131853 is a genuine KMT bent ultra high pressure tube, labeled TBE-UHP, BENT, .38X.125 T/W, ATTEN. It is a preformed length of UHP tubing used in the plumbing of a KMT waterjet intensifier pump, where it carries pressurized water to or from the attenuator, the pressure vessel that smooths pressure pulses from the intensifier strokes before the water reaches the cutting head.
The .38 x .125 marking is the tube size, commonly read as 3/8 inch outside diameter by 0.125 inch inside diameter, a standard size for UHP waterjet tubing. Because the tube is factory bent to fit a specific routing, KMT notes that bent tubing is intensifier revision specific, so the pump model and serial number should be checked against the KMT parts list before ordering.
Waterjet cutting shops, job shops and maintenance technicians who run KMT Streamline intensifier pumps keep tubes like this on hand to restore high pressure plumbing after a leak or fitting failure.
Available from King Surplus inventory in Del Rio, Texas.
Factory Information
- Manufacturer: KMT Waterjet (KMT Genuine Parts)
- Part Number: 72131853
- Label Description: TBE-UHP, BENT, .38X.125 T/W, ATTEN
- Component Type: Bent ultra high pressure (UHP) tube for the attenuator connection
- Tube Size Marking: .38 x .125 in (OD x ID)
- Label Date: 12/14/17
- Spec Basis: part label photo (KMT GENUINE PARTS, 72131853, TBE-UHP BENT .38X.125 T/W ATTEN, 12/14/17); KMT Genuine Parts bent tubing note https://kmtgenuineparts.com/products/tube-bent-hp-38-sst316-60k (bent tubing is intensifier revision specific)
Specifications
KMT
72131853
N/A
12/14/17
N/A
N/A
6
6
1
N/A
2
2.31
KSC1290 / 2116
Packaging fees
1.6 6x10 CH $3.00
SELL TO KING SURPLUS
Sitting on surplus of your own?
We'll buy it.
Family owned, four generations, since 1970.
Client Asset Management
A managed joint venture for enterprise surplus, powered by our AMP™ (Asset Management & Procurement).
Partner With Us →Payment Details
$49.95
Payment MethodsPayment Types Accepted : Visa, Mastercard, ACH, Wire Transfer, Check (14 Day Hold Before Release), Cash