The Apollo 94A-100-01 is a 3 inch forged brass, two-piece, full-port ball valve with female NPT (FNPT) connections on both ends. It is rated for 400 PSI cold working pressure and a service temperature range of 0 F to 400 F, making it suitable for HVAC, fuel gas, fire protection trim and drain, compressed air, oil, and general industrial flow control. The valve uses a chrome-plated brass ball and stem with PTFE seats and an EPDM body seal. The blowout-proof stem and adjustable packing nut allow long service life with minimal maintenance. The forged brass body provides higher pressure ratings than cast equivalents. Approvals include CSA, FM 1140, and UL. This unit is new in original packaging and ships from Del Rio, Texas. Apollo (Conbraco / Aalberts Integrated Piping Systems) is the recognized North American brand standard for forged brass industrial ball valves. Note: this valve is not approved for potable water use in the United States.

Manufacturer: Apollo (Conbraco / Aalberts Integrated Piping Systems) Model: 94A-100-01 MPN: 94A10001 UPC: 670750823558 Series: 94A Forged Brass Size: 3 in. FNPT (female NPT, both ends) Design: 2-Piece, Full Port Pressure Rating: 400 PSI CWP Temperature Range: 0 F to 400 F Cv: 1018 Body: Forged Brass (Cu >57%) Ball: Chrome Plated Brass Stem: Chrome Plated Brass, Blowout-Proof Seats: PTFE Seal: EPDM Handle: Plated Steel with PVC grip Approvals: CSA, FM 1140, UL Inlet to Outlet Length: 6.039 in Top to Inlet Center: 5.079 in Notes: Not for potable water use in the United States.