Honor Seiki VL-160C 2012 CNC VTL Vertical Turning Center, Fanuc 0i-TD, 78.7" Swing, 63" Table, 12-ATC, 60 HP, 17,491 Hours

Great Day Everyone. This Honor Seiki VL-160C CNC Vertical Turning Center has 17,491 hours and was manufactured in 2012. The equipment is being released as part of a planned transition to a different product line, scheduled for end of February/beginning of March. Units cannot be picked up until then, and final release dates may vary until the client releases machines for shutdown. We have bridge cranes available to go above these units, allowing configuration into work cells of 2-6 total units or more if needed into multiple work cells. Capacities vary but are either 0.5 ton or 1 ton with varying specifications for each bridge crane (available for viewing under our Bridge Cranes category). Raised operator work platforms are also available as an optional add-on. This turnkey solution can include transformers, safety switches, reservoirs, and any accessories specific to each unit as shown. We have the capacity to sell you the entire setup: machine, electrical, platform, and bridge cranes for a complete turnkey installation.

As these units are still in active production, the tooling changes daily. Towards the decommissioning date, if specific tooling is requested, we can work with the buyer to accommodate. They do come with chip conveyors, but current operational status is unknown. We can work with international buyers, or buyers with their own shipping capabilities or crews for teardowns if desired. Otherwise, units can be transported. Transportation is not included in any prices.

Recent Repairs / Maintenance Conducted on Unit: These are from internal PM documentation and repair systems. Additional information could be added at any time.

Recent Repairs (Last 12 Months):

• None reported

PM Work Checklists:

• Daily (~10 min): Guard/interlock inspection, indicator lamp check, air pressure (80-90 PSI), coolant supply and reservoir level, way lube oil level, chuck pressure regulator, extraction hose (if applicable), exterior cleaning.
• Weekly (~25 min): Coolant and hydraulic hose inspection, hydraulic fluid level, chip conveyor operation/hardware/covers, flexible electrical conduit (if applicable), extractor fan operation.
• Annual (21-point inspection): Spindle belts/gears/couplings, spindle runout, spindle drive system, axis backlash, ball screws/bearings, way covers/gibs, turret operation and alignment, tool positions, lubrication system and grease points, hydraulic system, coolant system, air system leaks, electrical wiring/connectors, machine leveling, filters, optional equipment (conveyor, feeder, bar loader).

Status: WORKING UNIT

=== ABOUT THIS LIQUIDATION - CNC MACHINE TOOLS ===

King Surplus is not a dealer. We are an industrial asset management and liquidation firm with over 50 years of experience specializing in large-scale plant relocations and negotiated liquidations that do not fit the public auction model.

This offering is part of a coordinated, negotiated liquidation of approximately 60 CNC machine tools with extensive supporting peripheral equipment, including work platforms, conveyors, overhead cranes, and structural systems.

Our client is retooling approximately 25% of a 400,000 sq. ft. manufacturing facility to support a new contract requiring a completely different class of machine tools and production processes. These machines are being sold for strategic business reasons and are not removals from failing or obsolete operations.

The liquidation is structured as a negotiated sale to allow the affected production area to be sold and cleared within a defined, short-term timeframe. Each asset offered is part of a larger, coordinated project. Additional machine tools, peripherals, and plant support equipment may be available beyond individual listings.

King Surplus manages the process from asset identification through orderly removal, providing buyers access to opportunities that rarely surface through traditional public auctions.

=== IMPORTANT EQUIPMENT TERMS - CNC MACHINE ===

King Surplus acts as AGENT only and is not the owner, manufacturer, or dealer of this equipment.

SOLD AS-IS, WHERE-IS, WITH ALL FAULTS
No warranties express or implied.

ALL SPECIFICATIONS ARE PRELIMINARY ESTIMATES ONLY, INCLUDING BUT NOT LIMITED TO:

• Hour meter readings reported as observed; accuracy not verified
• Electrical specifications (voltage, phase, amperage) MUST be confirmed by buyer from equipment nameplates
• Spindle accuracy, runout, backlash, and ballscrew condition NOT verified; load testing required by buyer
• CNC/control software, options, licenses, DNC compatibility, and tool holder types must be verified by buyer
• Dimensions and weights are approximate and may be based on manufacturer literature
• Model year taken from nameplate where available and may be approximate

BUYER INSPECTION STRONGLY ADVISED.
Failure to inspect constitutes acceptance of condition. Purchase without inspection is at buyers sole risk.

Any statement such as working, operational, or powered on reflects condition at time of observation only and does NOT constitute a warranty of future performance, accuracy, or suitability for production use. Equipment may fail immediately upon buyer operation.

KING SURPLUS IS NOT LIABLE FOR:

• Latent or hidden defects
• Spindle wear or failure
• Control, servo, or drive failures
• Hydraulic, pneumatic, or coolant system issues
• Any defect discovered after purchase

NO WARRANTY OF COMPLIANCE with OSHA, electrical codes, safety standards, or regulatory requirements.

ALL SALES FINAL. NO RETURNS.

By bidding or purchasing, buyer accepts these terms and agrees to indemnify and hold harmless King Surplus and the seller for all matters related to removal, rigging, transport, installation, use, operation, and subsequent resale.

Full Terms of Service: https://kingsurplus.com/terms-of-service
Contact: sales@kingsurplus.com | 830-995-5000